15Mhz digital function generator
Description
digital function generator
Model: LW-1645 (0.1hz-15MHz)
Features:
1.Frequency of the mode: 0.1Hz—2MHz/ 5MHz/ 10MHz/15MHz
2.Output waveform: Sine, Triangle, Square, ramp ±Pulse
3.TTL/CMOS and OUTPUT synchronous output
Specification:
| Model | LW1641 | LW1642 | LW1643 | LW1645 |
| Frequency | 0.1Hz-2MHz | 0.1Hz-5MHz | 0.1Hz-10MHz | 0.1Hz-15MHz |
| Output waveform | Sine, triangle,square, positive and negative pulse, positive and negative ramp | |||
| Output impedance | 50ohm±10% | |||
| amplitude | Not less than 50Vp-p (open circuit) | |||
| DC voltage | 0~±10V continuously adjustable | |||
| Symmetry range | 90:10–10:90 | |||
| Rising edge of square | <100ns | < 50ns | < 35ns | <35ns |
| Sine characteristic | ||||
| distortion | Less than 1% at 10H-100KHz | |||
| Frequency response | 0.1Hz~100MHz: ≤± 0.5dB
100 KHz-5MHz ≤±1dB (LW-1642) 100KHz~2MHz: ≤±1dB (LW1641) |
|||
| TTL/CMOS output | ||||
| Level | Level: TTL low level less than 0.4V in pulse wave, high level less than 3.5V,CMOS low less tan 0.5V in pulse wave, high level 5V–14V continuously variable. | |||
| Rising time | Less than 100ns | |||
| VCF input | ||||
| Output voltage | -5V~0V±10 | |||
| Max.volt-controlled | 1000:1 | |||
| Input signal | DC-1KHz | |||
| Frequency counter | ||||
| Measuring range | 1Hz~10MHz≥10Vp-p | |||
| Input impedance | Not less than 1Mohm/20F | |||
| Sensitivity | 100mVrms | |||
| Max. Input | 150V(AC+DC) | |||
| Input attenuation | 20dB | |||
| Accuracy
Line power |
Less than 0.003%±1 digit
220V/110V±10% 50Hz/60Hz |
|||
| Dimension | 270*225*90mm | |||
| weight | N.W. About 2.5Kg | |||
Category: Testing & Lab Machine
Related products
100Mhz 2ch 1GSa/sdigital storage oscilloscope
50v 5a adjustable dc power supply
dc load
Earth ground tester RS232 ground resistance tester/Ground Bond tester
Earth ground tester RS232 ground resistance tester/Ground Bond tester Model:LW7303 Feature : 1.Small volume, light weight 2.Special linear constant current output, current output range can be up to 30 ~ 40 A 3.Simple operation, key lock function 4.Provide 5 set of memory set 5.LCD display 6.Test line impedance self zero correction, ensure accuracy of test results 7.Resistance upper and lower limit set, intelligent alarm 8.Provide remote PLC control interface Parameter 7303


































































































