Compass Bussbar 10sqm 80A 3 POLES

Application busbar sytem for the line connection of MCBs or similar devices.
Type Designation
G fork connectors (German = Gabel)
S pin connectors (German = Steg)
1L, 2L, ..1, 2, … pole busbar system
xx distance from connector to connector:
no value = 17,8 mm (standard module width)
“27” = 26,7 or 27 mm
yyy length in mm
/10 cross section of busbar (10 sqmm)
-C connectors centered in line with middle of insulating profile
(3pole version)
Standards IEC / EN 61439-1, 2012-06: Low-voltage switchgear and controlgear
assemblies
Connection using terminals of MCBs or (fuse) switches / disconnectors or separate
feed-in terminals
Ratings
nominal voltage: max. 500 V
overvoltage category: III
pollution degree: 2
impulse voltage: 6 kV
rated current: 100 Amp (centre feed-in)
63 Amp (end feed-in)
short circuit rating: 50 kA, max. fuse 250 Amp
22 kA, max. BKR 250 A
10 kA (no protective device required)
degree of protection: fingerproof IP20
Materials
busbars: copper
insulating profile: UL listed PC-ABS blend
end caps: UL listed PC-ABS blend
Safety edges rounded
Environment all materials and manufacturing processes comply with
RoHS regulations
Accessories protection cover, end caps, feed-in terminals