Diameter | 300mm |
Housing/ Mask Material Type | Polycarbonate UV. |
Housing Color | Black-Gray-Orange |
Impact Resistance | IR3 |
Vibration | Class AJ3 |
Ingress Protection | IP55 |
Operating Temperature | -30°C to +70°C |
Operating Voltage | 12VDC |
LED | Red, Yellow and Greenl 5mm/10mm LEDs |
Lumenious Intensity | >250cd |
Solar Panel | 20W |
Battery | 12V-7Ah or 20Ah |
Operating Modes | It can work in 8 different scenarios. (It can be controlled by the button on it.) |
Nigh Mode | Available |
Protection Mode | Over chage & discharge protection |
Charging Type | MPPT (optional) |
Working Without Solar Power | With a fully charged 20Ah battery at least 20 days in 24-hour mode |
Battery Protection Feature | When the battery voltage drops below 11.5V, it closes the output and prevents it from drying out. |
Dimming feature | Light brightness can be controlled (Compatible with battery voltage) |
Smart Mode | The output level of the battery is given at 9 different brightness levels. |
Certificate | TS EN 12352 |
One of the most important features that distinguishes the “GPS Based Synchronous Flasher” from its counterparts is that it does not lose the synchronization without the need for a master device due to being GPS based. The non-GPS-based flasher products have a master device and It must be equipped with additional mode to enable synchronization. The disadvantage of such devices is that all devices lose synchronization if the master device is interrupted the communication with other devices or goes into a fault condition due to any reason.