MAKITA HR2653 26 mm (1″) 2.2 J AVT Combination Hammer with HEPA Self Dust Collection SDS-PLUS Bits

MAKITA HR2653 26 mm (1″) 2.2 J AVT Combination Hammer with HEPA Self Dust Collection SDS-PLUS Bits,

• 26 mm (1″) 2.2 J AVT Combination Hammer with HEPA Self Dust Collection, SDS-PLUS Bits
• Filter Cleaning Mechanism for More Efficient Drilling
• HEPA filter removes particles with an efficiency rating of 99.75%
• Dust collecting port on telescopic guide with a sliding range of 190 mm enables to accept longer drill bits
• Secure connection between dust case and dust collecting section for less dust leakage
• See-through dust case for easy checking of collected dust amount
• Easy dust case removal for convenient dust disposal and cleaning
• Easy to adjust position of dust collecting port
• A desired drilling depth can be obtained simply by sliding a push button on telescopic guide
• AVT (Anti-Vibration Technology) – extremely low vibration achieved by a counterweight mechanism and damper spring
• Easy-to-grip handle gives maximum power thrust and provides a sure and comfortable grip in any operation; overhead application, drilling with palm-up or palm-down grip
• Soft grip provides more comfort and control
• Powerful 800 W motor delivers 2.2 J (EPTA-Procedure 05/2009) of impact energy to handle the most demanding applications
• Torque limiter stops rotation if bit jams for increased operator safety and enhanced motor protection
• 3-mode operation for “Rotation Only”, “Hammering with Rotation” or “Hammering Only” for multiple applications
• Variable speed trigger allows operator to adjust speed based on materials or application
• Depth gauge for increased drilling consistency

• Impact Energy :

  EPTA-Procedure 05/2009: 2.2 J

  Our experimental conditions: 2.9 J

• Blows Per Minute (BPM) :

  0 – 4,600

• Sound Pressure Level :

  92 dB(A)

   

• Sound Power Level :

  103 dB(A)

• Noise K Factor :

  3 dB(A)

• Vibration Level :

  Chiselling Function w/ Side Grip: 9.0 m/s²

  Drilling into Metal: 2.5 m/s²

  Hammer Drilling into Concrete: 11.5 m/s²

• Vibration K Factor :

  Chiselling Function w/ Side Grip: 1.5 m/s²

  Drilling into Metal: 1.5 m/s²

  Hammer Drilling into Concrete: 1.5 m/s²

• Dimensions (L x W x H) :

  604 x 89 x 260 mm (23-3/4 x 3-1/2 x 10-1/4″)

• Net weight :

  3.1 – 4.3 kg (6.9 – 9.6 lbs.)

• Power supply cord :

  2.5 m (8.2 ft.)

  Standard Accessories:

  • Side Grip, Depth Gauge, Sealing Cap