MAKITA HR2630 26 mm (1″) 2.4 J Combination Hammer, SDS-PLUS Bits

MAKITA HR2630 26 mm (1″) 2.4 J Combination Hammer, SDS-PLUS Bits,

• Re-located operating mode lever for increased protection and durability; enables switch to rotate both left and right
• conversely Easy-to-grip handle gives maximum power thrust and provides a sure and comfortable grip in any operation; overhead application, drilling with palm-up or palm-down grip
• furthermore Soft grip provides more comfort and control
• Powerful 800 W motor delivers 2.4 J of impact energy to handle the most demanding applications
• Forward/reverse lever – position of the switch allows brushes to positione so that the drill maintains same speed and torque in forward and reverse
• next 3-Mode operation for “Rotation Only”, “Hammering with Rotation” or “Hammering Only”
• then Variable speed trigger allows operator to adjust speed based on materials or application
• 40 Bit angle settings allow the bit to set at optimum positions
• One-touch sliding chuck for easy bit installation and removal
• Depth gauge for increased drilling consistency
• Recessed lock-on button for continuous use
• finally Double insulated

• Continuous rating input :

  800W

• Impact Energy :

  EPTA-Procedure 05/2009: 2.4 J
  Our experimental conditions: 2.9 J

• Capacities:

  Concrete: 26 mm (1″)
  Core Bit: 68 mm (2-11/16″) Diamond Core Bit (Dry Type): 80 mm (3-1/8″) Steel: 13 mm (1/2″) Wood: 32 mm (1-1/4″)

• Blows Per Minute (BPM) :

  0 – 4,600

• No Load Speed (RPM) :

  0 – 1,200

• Sound Pressure Level :

  90 dB(A)

   

• Sound Power Level :

  101 dB(A)

• Noise K Factor :

  3 dB(A)

• Vibration Level :

  Hammer Drilling into Concrete: 15.0 m/s²

• Vibration K Factor :

  Hammer Drilling into Concrete: 1.5 m/s²

• Vibration Level :

  Chiselling-Function-w/Side-Handle:9.5 m/s²

• Vibration K Factor :

  Chiselling-Function-w/Side-Handle:1.5 m/s²

• Vibration Level :

  Drilling-into-Metal:2.5 m/s² or less

• Vibration K Factor :

  Drilling-into-Metal:1.5 m/s²

• Dimensions (L x W x H) :

  385x77x209 mm (15-1/8″x3″x8-1/4″)

• Net weight :

  2.8 – 3.3 kg (6.3 – 7.2 lbs.)

   

• Power supply cord :

  2.5 m (8.2 ft)

  Standard Accessories:

  • Side Handle, Depth Gauge, SDS-Plus Bit Set (country-specific), Bit Grease (country-specific), Dust Cup (country-specific), Bull Point (country-specific), Scaling Chisel (country-specific), Cold Chisel (country-specific)