MAKITA DTD172 18V LXT BL Brushless Cordless Wood/Bolt/T-Mode 180 N·m Impact Driver

MAKITA DTD172 18V LXT BL Brushless Cordless Wood/Bolt/T-Mode 180 N·m Impact Driver,

• Tool head slimmer than DTD171 enables easy screwdriving in tight corners or confined spaces
• Slimmer tool body due to smaller controller circuit
• Light mode enables to use DTD172 as a handy light on dark job sites
• Anti-bit wobbling structure; Two ball bearings are used to securely hold the anvil for reduced bit wobbling
• One-touch bit installation; Reduced resistance allows for easier bit installation; Designed to hold the bit more securely
• Twin LED lights on both sides illuminate the work area for increased visibility
• Wood/Bolt/T-Mode (1, 2)/Max/Hard/Medium/Soft Mode for Multiple Applications
• Redesigned mode selection switch for one-handed mode selection
• Rigid anvil retention for reduced bit wobbling
• Power selection switch provides the user with precise fastening control for a wide range of applications
• BL-motor-delivers 3,600 max RPM and 180 N·m of max torque
• BL-motor-is electronically controlled to optimize battery energy use for longer run time per charge
• BL-motor-eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life
• BL-motor-efficiently uses energy to match torque and RPM to the changing demands of the application
• Lightweight for reduced operator fatigue
• Convenient one-touch 6.35 mm (1/4″) hex chuck for quick bit changes (for some countries only)
• Soft grip provides increased comfort on the job

• Capacity :

  Machine Screw: M4 – M8 (5/32 – 5/16″)  Standard Bolt: M5 – M16 (3/16 – 5/8″)  High Strength Bolt: M5 – M14 (3/16 – 9/16″)  Coarse thread (in length): 22 – 125 mm (7/8 – 4-7/8″)  Wood (Auger Bit): 24 mm (15/16″)

• Hex Shank :

  6.35 mm (1/4″)

• No Load Speed (RPM):

  Max / Hard / Mid / Soft / Wood / Bolt / T (1) / T (2) mode:: 0 – 3,600 / 3,200 / 2,100 / 1,100 / 1,800 / 3,600 / 2,900 / 3,600

• Impacts Per Minute (IPM):

  Max / Hard / Mid / Soft / Wood / Bolt / T (1) / T (2) mode:: 0 – 3,800 / 3,600 / 2,600 / 1,100 / 3,800 / 3,800 / N/A / 2,600

• Max Fastening Torque:

  180 N·m (1,590 in.lbs.)

• Fastening Torque :

  Hard / Mid / Soft: 170 / 50 / 20 N·m (1,510 / 440 / 180 in.lbs.)

• Max Output :

  290 W

• Vibration Level :

  Impact tightening of fasteners of the maximum capacity of the tool: 13.5 m/s²

• Vibration K Factor :

  Impact tightening of fasteners of the maximum capacity of the tool: 1.5 m/s²

• Sound Pressure Level :

  97 dB(A)

• Sound Power Level :

  108 dB(A)

• Noise K Factor :

  3 dB(A)

• Dimensions (L x W x H) :

  w/o Battery: 114 x 81 x 189 mm (4-1/2 x 3-3/16 x 7-7/16″)  w/ BL1815N / BL1820B: 114 x 81 x 218 mm (4-1/2 x 3-3/16 x 8-5/8″)  w/ BL1830B / BL1840B / BL1850B / BL1860B: 114 x 81 x 236 mm (4-1/2 x 3-3/16 x 9-1/4″)

• Hole Saw Diameter :

  38 mm (1-1/2″)

• Shank/Drive :

  Hex Shank 6.35 mm (1/4″)

• Net weight :

  1.2 – 1.5 kg (2.6 – 3.3 lbs.)

  Standard Accessories:

  • Phillips Bit, Belt clip, Battery, Charger