MAKITA TD003G 40Vmax XGT BL Brushless Cordless Wood/Bolt/T-Mode 220 N·m Impact Driver

MAKITA TD003G 40Vmax XGT BL Brushless Cordless Wood/Bolt/T-Mode 220 N·m Impact Driver,

• 40Vmax XGT BL Cordless T-Mode 210 N·m (1,860 in.lbs.) Impact Driver
• Combination of sufficient fastening performance and high cost-competitiveness achieved by carefully selecting the functions
• Aluminum hammer case + Black bumper
• Simple impact power selection:
  ∙ 4 modes (Max/ Hard/ Medium/ Soft for bolt)
  ∙ 1 T-mode (for thin metal only)
• Max fastening torque: 210 N·m
  • Despite increased cost-competitiveness, the max fastening torque is close to that of TD001G, the flagship model of our XGT Impact drivers
  • Extended overall length ensures sufficient performance of hammer, enabling to outperform TD001G in heavy-duty operation
• Light mode
  • To turn on the light, set F/R change lever in the neutral position, then pull the switch trigger. To turn off the light, pull the switch trigger again
  • The light turns off automatically one hour after turned on
• Excellent performance in continuous heavy-duty operation
  High power 40Vmax XGT Li-Ion battery reduces the current load on the controller, allowing for continuous heavy-duty operation
• Constant speed control allows to operate the tool at the same speed as that at which you operate the tool on a full charged battery, even when the remaining battery capacity becomes low
• One-touch bit installation
  • Smoother installation of the bit has been achieved by reducing the resistance against insertion of the bit
  • By increasing the load of sleeve holding spring, we have reduced the chance of unexpected falling off of the bit
• Anti-bit wobbling structure
• XPT (eXtreme Protection Technology)
• BL motor
• Soft grip
• Belt clip
• One LED job light each on both sides

• Capacity:

  Machine screw: M4 – M8 (5/32 – 5/16″)

  High strength bolt: M5 – M14 (3/16 – 9/16″)

  Steel: 22 mm (7/8″)

  Wood (Self-feed bit): N/A mm (N/A”)

  Standard bolt: M5 – M16 (3/16 – 5/8″)

  Coarse thread (in length): 22 – 125 mm (7/8 – 4-7/8″)

  Wood (Auger bit): 24 mm (15/16″)

• Masonry drill diameter:

  N/A mm (N/A”)

• Hole saw diameter:

  38 mm (1-1/2″)

• Shank/Drive:

  Hex Shank 6.35 mm (1/4″)

• No Load Speed (RPM):

  Max / Hard / Med. / Soft / T mode: 0 – 3,700 / 0 – 3,200 / 0 – 2,100 / 0 – 1,100 / 0 – 2,400

• Impacts per minute (IPM):

  Max / Hard / Med. / Soft / T mode: 0 – 4,100 / 0 – 3,600 / 0 – 2,600 / 0 – 1,400 / N/A

• Fastening torque:

  Hard / Med. / Soft: 170 / 50 / 20 N·m (1,510 / 440 / 180 in.lbs.)

• Max fastening torque:

  210 N·m (1,860 in.lbs.)

• Max output:

  520 W

• Vibration Level:

  Impact tightening of fasteners of the maximum capacity of the tool: 11.9 m/s²

• Vibration K Factor:

  Impact tightening of fasteners of the maximum capacity of the tool: 1.5 m/s²

• Sound Pressure Level:

  95 dB(A)

• Sound Power Level:

  106 dB(A)

• Noise K Factor:

  3 dB(A)

• Dimensions (L x W x H):

  w/o Battery: 121 x 86 x 195 mm (4-3/4 x 3-3/8 x 7-5/8″)

  w/BL4040:121 x 86 x 252 mm (4-3/4 x 3-3/8 x 9-7/8″)

  w/BL4080F:121 x 86 x 293 mm (4-3/4 x 3-3/8 x 11-1/2″)

  w/BL4020/BL4025: 121 x 86 x 245 mm (4-3/4 x 3-3/8 x 9-5/8″)

  w/BL4050F:121 x 86 x 274 mm (4-3/4 x 3-3/8 x 10-3/4″)

• Net weight:

  1.7 – 2.9 kg (3.7 – 6.4 lbs.)

  Standard Accessories:

  • Belt clip, Hand strap (country-specific), Battery, Charger