PHONEIX CONTACT – Interface converters
GW MODBUS TCP/RTU 2E/4DB9
2702767
The GW MODBUS TCP/RTU… gateway converts serial based Modbus RTU (or ASCII) to Modbus TCP. Supports serial client or server devices. Includes two RJ45 ports and four D-SUB 9 ports.
| Electrical isolation | IEC UL 61010-1 (VCC // Ethernet) |
| Test voltage data interface/data interface | 1.5 kVrms (50 Hz, 1 min.) |
| Test voltage data interface/power supply | 1.5 kVrms (50 Hz, 1 min.) |
| 1.5 kVrms | |
| Supply | |
| Supply voltage range | 10.8 V DC … 30 V DC (via pluggable COMBICON screw terminal block) |
| Typical current consumption | 110 mA (24 V DC) |
| Max. current consumption | 120 mA (24 V DC) |
| Function | |
| Management | Web-based management |
| Status and diagnostic indicators | LEDs: Status, ACT/LNK (Ethernet data traffic) |
Connection data
| Supply | |
| Conductor cross section, flexible | 0.20 mm² … 2.50 mm² |
| Conductor cross section AWG | 24 … 12 |
| Tightening torque | 0.5 Nm … 0.6 Nm |
Interfaces
| Signal | Ethernet |
| Modbus | |
| Web server | yes |
| Data: Modbus/TCP | |
| Serial transmission speed | 10/100 Mbps, auto negotiation |
| Connection method | RJ45 jack, shielded |
| No. of channels | 2 |
| Transmission length | ≤ 100 m (shielded twisted pair) |
| Protocols supported | Modbus RTU, Modbus ASCII, Modbus TCP |
| Auxiliary protocols | ARP, DHCP (Client), PING |
