Compass Bussbar 10sqm 80A Single Pole

Single Pole Busbars
G-1L-xx-yyy/zz, S-1L-xx-yyy/zz.
Application busbar sytem for the line connection of MCBs or similar devices.
Type Designation
G fork connectors (German = Gabel)
S pin connectors (German = Steg)
1L single pole busbar system
xx distance from connector to connector:
no value = 17,8 mm (standard module width)
“27” = 26,7 or 27 mm (MCB + aux. switch)
yyy length in mm
/zz cross section of busbar
Standards
IEC / EN 61439-1, 2012-06: Low-voltage switchgear and controlgear
assemblies
UL 508: Industrial Control Equipment
UL 1077: Supplementary Protectors for Use in Electrical Equipment
Connection using terminals of MCBs or suitabel connection terminals
Ratings
nominal voltage: AC 1000 V
DC 1500 V
overvoltage category: III
pollution degree: 3
impulse voltage: 8 kV
rated current:
10 sqmm 63/100 Amp (end feed-in / centre feed-in)
12/14 sqmm 75/120 Amp (end feed-in / centre feed-in)
16 sqmm 80/130 Amp (end feed-in / centre feed-in)
25 sqmm 100/180 Amp (end feed-in / centre feed-in)
36 sqmm 130/220 Amp (end feed-in / centre feed-in)
short circuit rating: 50 kA, max. fuse 250 Amp
22 kA, max. BKR 250 A
10 kA (no protective device required)
degree of protection: fingerproof IP20
Materials
busbars: copper
insulating profile: UL listed PC-ABS blend
end caps: UL listed PC-ABS blend
Savety edges rounded
Environment all materials and manufacturing processes comply to
RoHS regulations
Accessories connection terminals, end caps